Consultation paper summary and key implications for industry

On 7 August 2026, the Department of Climate Change, Energy, the Environment and Water (Department) released a consultation paper to support the legislated review of the Safeguard Mechanism (Consultation Paper).

The review has two objectives:

  • to assess whether the 2023 reforms are delivering Australia’s 2030 emissions reduction targets, and
  • to determine the policy settings required for the Safeguard Mechanism to contribute its proportionate share of Australia’s 2035 targets of 62-70 percent below 2005 levels.

Feedback on the Consultation Paper closes on 18 September 2026.

Background

The Safeguard Mechanism was established in 2016. It creates a framework through which Australia’s largest emitting industrial facilities (those with scope 1 emissions of more than 100,000 tonnes of carbon dioxide equivalent per year) must ensure their greenhouse gas (GHG) emissions do not exceed baselines (known as emissions limits).

The Safeguard Mechanism was reformed in 2023, introducing constraints on emissions and putting large industrial facilities on a trajectory to net zero by 2050. The reforms introduced annually declining baselines at a default rate of 4.9 percent per year, with the aim of reducing net Safeguard emissions from 139 Mt to 100 Mt between 2023 and 2030. The reforms also introduced the creation of Safeguard Mechanism Credits (SMCs) for facilities that outperform their baselines, and a range of flexible compliance mechanisms including offsets, banking, borrowing and multi-year monitoring periods. As part of the 2023 reforms, the Government committed to a review in 2026-27 to ensure the Safeguard Mechanism’s design is appropriately calibrated and effectively delivering emissions reductions in line with Australia's targets.

The Consultation Paper marks the formal commencement of this review. The Government has emphasised that the review is not intended to make fundamental reforms to the Safeguard Mechanism’s design. Stakeholder consultation will take place throughout the second half of 2026, with the Government intending to release its policy positions and any proposed rule amendments in early 2027. In parallel with the review, the Climate Change Authority has been tasked with providing advice to the Government on the appropriate baseline decline rate for the period from 2030-31 to 2034-35, and whether the Safeguard Mechanism is driving sufficient on-site abatement.

Early indications the Safeguard Mechanism is working

The Consultation Paper notes that the Safeguard Mechanism is currently on track to meet its legislated 2030 emissions objectives. Net emissions from covered facilities have fallen quicker than anticipated, namely 7.4 percent in 2023-24 and 5.5 percent in 2024-25. Net emissions are projected to be 90 Mt in 2030, outperforming the Safeguard Mechanism’s 100 Mt emissions target, while cumulative emissions are projected to total 1,181 Mt over the decade from 2021-30, compared with a 1,233 Mt target.

According to the Consultation Paper, the Safeguard Mechanism's positive early results are attributable to three principal factors: the effectiveness of the baseline-setting framework, production growth being lower than originally forecast, and greater-than-expected uptake of concessional baselines by trade-exposed facilities.

Meeting the 2035 target and post 2030 baseline decline rate

The Consultation Paper proposes that the Safeguard Mechanism continue to deliver a proportionate share of Australia's national emissions reduction task, consistent with the approach adopted for the 2030 target. In doing so, the Safeguard Mechanism would contribute to achieving Australia's proposed 2035 target of reducing emissions by 62 percent to 70 percent below 2005 levels.

The baseline decline rate for the period from 2030-31 to 2034-35 will be a key mechanism is achieving that outcome. While baselines are currently subject to a default annual decline rate of 4.9 percent until 2030, the post 2030 decline rate has not yet been determined and will depend on the finalisation of the Safeguard target.

The Consultation Paper seeks stakeholder feedback on the factors to be considered when determining an appropriate baseline decline rate for the period from 2030-31 to 2034-35, noting that the decline rate will need to be calibrated to ensure the agreed target is met. Relevant considerations identified by the Government include forecast production growth, access to concessional baselines, policy changes resulting from the review process, treatment of a reserve, and credits issued to facilities that fall below the Safeguard Mechanism coverage threshold.

Potential restrictions on ACCU use and incentives for on-site abatement

One of the most significant issues raised in the Consultation Paper is whether additional measures are needed to reduce reliance on Australian Carbon Credit Units (ACCUs) and strengthen incentives for on-site abatement. Currently, there are no restrictions on the type or quantity of ACCUs that can be surrendered, although a facility surrendering ACCUs totalling more than 30 percent of its baseline must explain what is preventing on site emission reduction action. While ACCUs play an important role in providing compliance flexibility and reducing compliance costs, the Government is concerned that ready access to lower-cost offsets may delay investment in emissions reduction activities at Safeguard facilities.

The scale of current ACCU use is notable. In 2024-25, covered facilities surrendered 10.8 million ACCUs for compliance purposes, compared with only 2.6 million Safeguard Mechanism Credits (SMCs).

To encourage greater levels of on-site abatement, the Government is seeking feedback on several potential reforms, including:

  • quantitative limits, which would cap the volume of ACCUs that may be surrendered as a proportion of a facility's baseline, gross emissions or exceedance;
  • discounting arrangements, which would require facilities to surrender more than one ACCU for each tonne of baseline exceedance, whether generally or after a threshold; and
  • vintage or other qualitative restrictions, which would limit the method type or vintage of ACCUs used for compliance.

International carbon units

The Consultation Paper indicates that the Government does not propose to introduce international carbon units for Safeguard Mechanism compliance and intends to maintain the Safeguard Mechanism's focus on domestic abatement. This approach is consistent with Australia's Net Zero Plan and reflects advice from the Climate Change Authority1 that Australia's 2035 emissions reduction target can be achieved without reliance on international offsets.

While the Government acknowledges that international carbon markets established under Article 6 of the Paris Agreement may play an increasingly important role in global decarbonisation efforts, it notes that these markets remain relatively immature and are unlikely to provide offsetting opportunities at prices competitive with ACCUs in the near term. The Consultation Paper nevertheless seeks stakeholder feedback on whether there may be a future role for high-integrity international units and what further market development would be required before their inclusion in the Safeguard Mechanism could be considered.

Banking, borrowing and multi-year monitoring beyond 2030

The Consultation Paper considers whether the Safeguard Mechanism's existing compliance flexibility measures should continue beyond 2030.

Banking allows facilities to carry forward SMCs generated in one compliance year for use in a future year. The Consultation Paper notes that banking supports early emissions reductions and promotes price stability by allowing SMCs to be used when most needed. While concerns were expressed during the 2023 reforms about surplus SMCs being carried into the post-2030 compliance period, the Government considers that the risk of excess carry-over has largely been removed through the revised baseline-setting framework. The Consultation Paper therefore seeks feedback on whether banking should continue beyond 2030 and remain unrestricted through to 2050.

Borrowing allows facilities to borrow up to 10 percent of the following year's baseline to manage short-term compliance exceedances, subject to repayment with interest. The Consultation Paper notes that uptake has been limited to date and that the mechanism appears to be operating as intended. Nevertheless, feedback is sought on whether borrowing should continue beyond 2030, particularly given the need to balance compliance flexibility against the risk of delaying emissions reductions.

Multi-year monitoring periods (MYMPs) allow facilities that exceed their baseline in an initial year (or years) to average their compliance position over a period of up to five years, provided the facility has a firm, credible plan to reduce emissions below its cumulative baselines by the end of the monitoring period. Under the current rules, all MYMPs must conclude by no later than 30 June 2030. While the mechanism was intended to support the transition to declining baselines, the Consultation Paper questions whether it remains necessary beyond 2030 given the availability of other compliance flexibility measures and the risk that it may defer emissions reduction activity. Stakeholder views are being sought on whether MYMPs should continue beyond 2030 and, if so, in what circumstances.

Cost containment measure

The Consultation Paper also seeks feedback on whether the current cost containment measure remains an effective safeguard against future ACCU price increases. The cost containment measure allows businesses to purchase ACCUs from the Government at a fixed price (currently $82.68 in 2025-26). To date, it has not been used given that ACCU prices remain significantly lower. However, the Government is seeking feedback on whether the mechanism remains sufficient to provide businesses with confidence around future compliance costs, particularly given that ACCU holdings available under the measure are finite, being sourced from the exit of carbon abatement contracts and not expected to be replenished beyond 2030. Stakeholders are also invited to comment on whether the fixed price appropriately balances compliance cost certainty with incentives to invest in emissions reduction activities.

Trade-exposed industries, carbon leakage and potential border carbon adjustment

The Consultation Paper considers whether the Safeguard Mechanism continues to appropriately support the competitiveness of emissions-intensive, trade-exposed industries as Australia's climate ambition increases. The Government notes that, while the Safeguard Mechanism is designed to reduce emissions, it must also manage the risk of carbon leakage. This arises where production shifts from Australia to jurisdictions with less stringent climate policies, resulting in economic costs to Australia without delivering a reduction in global emissions.

The Consultation Paper highlights that support for trade-exposed industries currently operates through a combination of the Safeguard Mechanism's production-adjusted framework, Trade-Exposed Baseline Adjustments (TEBA), and broader government initiatives under the Future Made in Australia agenda, the National Reconstruction Fund and the Net Zero Fund. The Government's position is that industry policy should support strategic and emerging industries, while the Safeguard Mechanism continues to provide technology-neutral incentives for emissions reduction.

Under the current framework, trade-exposed facilities can apply for TEBA status, which provides a reduced baseline decline rate for a three-year period. Since the 2023 reforms commenced, 23 manufacturing facilities have received TEBA status, with recipients concentrated in sectors including alumina and aluminium, cement, clinker, lime, steel and chemical manufacturing.

However, the Consultation Paper identifies some concerns with the current TEBA framework. In particular, it notes that linking TEBA eligibility to scheme cost impacts may create inequities between competing facilities, discourage investment in on-site abatement, and result in TEBA facilities remaining on permanently more favourable baseline trajectories than non-TEBA facilities.

To address these concerns, the Government is consulting on two key reform options:

  • a sectoral TEBA model, under which eligibility would be based on sector-level carbon leakage risk rather than facility-specific cost impacts; and
  • a ‘catch-up’ mechanism, designed to progressively align TEBA and non-TEBA baselines before 2050.

The Consultation Paper also builds on the findings of the Carbon Leakage Review.2 It concluded that existing measures are sufficient to manage carbon leakage risks in the short to medium term, but that additional measures may be required over time as Safeguard baselines continue to decline. In particular, the Government is seeking feedback on the possible introduction of a border carbon adjustment (BCA). A BCA would seek to ensure that imported goods face carbon obligations broadly equivalent to those applying to domestic production, thereby reducing carbon leakage risks and supporting investment in Australian low-emissions industries. Consistent with the recommendations of the Carbon Leakage Review, the Consultation Paper identifies cement and clinker as the most likely candidates for an initial BCA, with lime, hydrogen, ammonia and derivatives, steel and iron, and glass identified as potential future candidates.

The Consultation Paper also seeks feedback on how a BCA should interact with existing TEBA arrangements. Consistent with the recommendations of the Carbon Leakage Review, the Government is considering whether TEBA concessions should be removed for commodities that become subject to a BCA, on the basis that a BCA would provide an alternative mechanism for addressing competitiveness and carbon leakage concerns.

Sector-specific issues

The Consultation Paper addresses two sector-specific issues affecting coal mining and transport sectors.

Coal mining accounts for approximately one-third of covered facilities and around 24 percent of covered emissions. Unlike other sectors, coal facilities are subject to a hybrid baseline-setting approach that incorporates both industry-average and site-specific emissions intensity values. The Government is seeking feedback on whether this approach should continue beyond 2030 or be aligned with the baseline-setting framework applicable to other Safeguard Mechanism facilities. The Consultation Paper also seeks views on whether the current settings adequately address periods of unplanned interruption or prolonged low production at coal operations, particularly where emissions remain high despite reduced production levels.

Road and rail transport are also the subject of review, with the Government examining whether existing reporting arrangements create competitive distortions between the two sectors. Currently, transport operators may define facilities on either a state or territory basis or a national basis, which has resulted in relatively limited coverage of road freight emissions compared with rail. The Consultation Paper queries whether removing optionality about state and territory versus national reporting for transport facilities will help to improve land transport sector coverage.

Coverage threshold

The Consultation Paper considers whether the Safeguard Mechanism’s current coverage threshold of 100,000 tonnes of carbon dioxide per year remains appropriate, or whether it should be lowered. A number of different levels are considered, with the Consultation Paper noting that a lowered threshold of 25,000 tonnes would result in the number of facilities being covered increasing to 499 from the existing 208.

Lowering the threshold could provide an efficient pathway to increase the Safeguard Mechanism's reach, reduce annual average costs of abatement, and address competitive market distortions within partially covered sectors. However, any change would need to be assessed against administrative burden, inflationary impacts, and impacts on competitiveness.

The Consultation Paper also considers broader coverage issues, including the treatment of facilities that fall below the current threshold as baselines decline, and whether lowering the threshold would bring new sectors within the scheme’s coverage.

How can we assist you?

If you would like further information on the Safeguard Mechanism Review, assistance in preparing feedback to the Department by the 18 September 2026 deadline, or advice on how the proposed reforms, including potential restrictions on ACCU use, changes to banking, borrowing and multi-year monitoring, or adjustments to the cost containment measure, may affect your compliance strategy, carbon market participation or decarbonisation plans, please contact a member of our climate change and sustainability team.

Footnotes

  1. 1

    2035 Emissions Reduction Targets Report | Climate Change Authority.

  2. 2

    Carbon Leakage Review Final Report.

Contact